The ginkgo nut shelling machine is the main equipment used to process Ginkgo Biloba. Ginkgo sheller is divided into two systems: shelling and waste shells removal system. Under the right cone is the shelling system, and the left is the waste shell removing system. The gingko sheller machine has the advantages of high shelling rate, easy operation and long service life. it is a good choice for ginkgo processing plant.

The Structure of
Ginkgo Shell Peeling Machine
A. Shelling system: The sheller is composed of feed hopper, grinding wheel cover, fixed grinding wheel, movable grinding wheel and motor.
B. Waste shell removal system: by the exhaust fan, exhaust fan cover protection device, exhaust pipe, drainer funnel, motor combination.
C. Fixing and collecting device: rack, collector, motor base plate.
Working Principle of Gingko Sheller Machine
When the ginkgo enters the inside of the grinding wheel cover under the action of gravity, the grinding wheel makes the fruit shell gradually smaller or even cracking due to the strong grinding wheel, and then discharges the inside of the machine under the effect of the shelling system. The white nuts are relatively heavy due to their heavy weight. Fall into the collector under gravity.
Daily attention:
1. During the operation of the current and the motor, we must check if the bolts are loose and beating, whether the auxiliary junction boxes and fan covers are loose and so on.
2. Also regularly check the replacement of lubricating oil (grease, mechanical oil) Check the bearing clearance is generally controlled within 100mm is 0.02-0.08mm, more than 100 is generally 0.06 --- 0.20mm, in actual use, the large diameter to About 0.17 will be replaced. Mainly depends on the size of the motor's breath, small motors generally a few millimeters, large-capacity motors are generally about a millimeter.
3. If you want to overhaul, you must move the key switch to the inspection position to prevent accidents.