Moringa Leaf Grinding|Powder Making Machine

Instructions for Moringa Powder Grinding Machine
1. Universal crusher is the entire box, unboxing, moved to the appropriate location, place a smooth, power, you can try.

2. Before use should check the transmission parts are loose and other abnormal phenomenon, the direction of the machine should be consistent with the direction of the arrow.

3. Use no-load test for 1-2 minutes, until no abnormal phenomenon can be expected to feed, feed should gradually increase the volume of traffic, and observe the motor power consumption and operation at any time until the balance of feeding and power supply is working properly, Dead cut off the gate, to work.

4. In the middle, if the material is too wet, too sticky sticky, affecting the powder, the material should be drying or replace the thicker sieve. Replace the sieve simply open the front cover can be carried out, install the front cover should pay attention to the elastic hand wheel on both sides, to ensure that the front cover and the chassis sealed. Stop feeding before stopping, let the machine run for 5-20 minutes before stopping. In order to reduce the residual material.