The automatic liquid pouch packing machine is suitable for soy sauce, vinegar, juice, milk and other liquids, using 0.08mm polyethylene film, its molding, bag making, quantitative filling, ink printing, seal cutting and other processes are all automatically carried out, the film is UV disinfection before packaging , meet the requirements of food hygiene.
Advantages of Back Side Liquid Packing Machine
1. Automatically complete all work such as metering, bag making, filling, sealing, hot pressing batch number, cutting and counting. Back side sealed heat seal mode.
2. Chinese display control system, stainless steel box, only need to set the required parameters in the display setting unit (filling bag length, etc.), the control system is automatically optimized to match the various actions, so as to achieve the best packaging speed .
3. Stepper motor control, the system has high accuracy, no need to adjust other components can change the bag length, and accurate.
4. Fine packaging performance, low noise, clear sealing texture and strong sealing performance
5. Install a safety plastic box on the rotating blade to avoid operator's hand injury.
6. After 3 years of continuous operation, new temperature controllers, blades and stampers need to be replaced. The rest of the day is 2 shifts. Other parts are still safe and reliable.
7. With printer (to be able to code the date and batch number) and rotating blade (be able to adjust the length of bag and shape of bag notch edge packing.
Maintenance of Automatic Liquid Pouch Packaging Machine
1. If you find that the liquid pouch packaging machine is working abnormally, turn off the power immediately and correct the error before continuing to use it.
2. Each class should inspect the components of the liquid packaging machine and the lubrication conditions. Add 20# lubricants to maintain the lubrication of all parts to extend the service life, otherwise the service life will be shortened;
3. When the liquid pouch packing machine stops using, it should use clean water to wash away the residue inside the pipeline in time to keep the pipeline clean, so as to guarantee the packaging quality when it is used next time;
4. When using in winter, if the temperature is below 0°C, the quantitative pump and the ice in the pipeline must be melted with hot water. If it does not melt, the connecting rod may be broken and cannot be used, or the machine cannot be started