The peanut sheller machine
is one of the main products of our company. It becomes an indispensable part in agriculture and industry. So how much do you know about the operation of peanut sheller? Here is a brief introduction.
1. Fix the motor so that the two slots are on the same line. Connected power supply, must be good earthed, anyway, after the transfer, to stop the machine idle for 5 minutes to check whether each part screw loosening, triangle elastic, lubrication part is hot, and two new pressure situation, if there is any exception to adjust.
2. The coarse rubber roller and the fine rubber roller are interstitial. Thick rubber roller by adjusting the spring pressure, through the role of the rocker arm tightly pressed it on fine roller, spring pitch is larger, the smaller the pressure, to the thick rubber roller pressure is small, on the other hand, the greater the spring pitch adjustment requirements at around 2 to 4 mm, this is the key to affect the skin effect, the machine has been adjusted when delivery from factory to use range, but users should always be adjusted according to actual situation.
3. Before the operation of the peanut sheller, cover the protective cover of each transmission part, and the safety first requirement must be carried out in the operation, and the operating procedures shall be strictly followed. No negligence is allowed.
Hope the three points will teach you the correct operation method. If you have any question, just feel free to contact me.