On a shelling machine, threshing crops shell and ensure the integrity of crops is the best, but a lot of castor bean peeler
can not always achieve the desired degree of our hearts, especially integrity, so how to improve the integrity of the seeds?
From the machine itself, the quality of castor huller is no problem, appear castor particles are broken, we may be not operating properly, like wet and dry castor is not in accordance with the requirements, too dry, it is easy to appear the situation of particle breakage; too wet, it will reduce the speed of shelling.
Therefore, how to ensure the proper humidity of castor crop is very important, we can according to the proportion of science will be adequate, enough warm water sprayed evenly on the castor crop, can also be covered with plastic film, to adjust the time according to the length, and then drying in the sun for 1 hours can be castor hulling.
Through such full preparation, our castor bean shelling machine will have a good shelling effect, so that we can use a small amount of time and fast completion of the shelling of castor beans.
The shelling speed can reach 1000kg/h. The LG600-B model is driven by 195 diesel engine, the net removal rate is as high as 95%, and the crushing rate of castor seed is less than 3%. The weight is 350kg, and the size of the machine is 2.1m x 1.0m * 1.5m. If you need the sheller, just feel free to contact me.