The Repair Method of Peanut Butter Grinding Machine
1, the butter grinding machine is high-precision machinery, wire speed up to 20m / s, and grinding disc gap is very small. After the repair must be replaced with a dial indicator to correct the shell and the spindle coaxial error ≤ 0.05mm.
2, repair the machine, in the open, back to adjust the process, never allowed to use iron Chung direct percussion. Apply a wooden hammer or pad on the block gently to knock, so as not to damage the parts.
3, the machine seals: divided into static, dynamic seal. Static seal with O-type rubber ring, dynamic seal with a combination of rigid mechanical seal. Found that the hard seal surface scratches should be immediately in the flat glass or flat castings for grinding repair, grinding material ≥ 200 # silicon carbide grinding paste is better. If the seal is damaged or cracked, please replace it immediately.
4, in the course of use, we should be based on the processing of materials, as appropriate, regular maintenance of it.
5, For maintenance of the motor, please refer to the motor instruction manual.
6, the vast majority of spare parts for the national standard, the Department of standard parts, all over the country are purchased.