For long-term using peanut roaster machinery and equipment, if not ground maintenance, daily high-intensity production, the mechanical performance is very easy to wear, life will be significantly reduced. Seeds and nuts  roaster machinery can do the following simple maintenance.

1, in the use of the oil will be marked on the oil, every week to check whether the worm gear is lack of oil, oil should be added oil.

2, each class shut down when the air switch, such as long-term do not, in the shutdown will be the pot of raw materials to remove all the clean, and a small amount of edible oil in the feed mouth for three minutes, keep the pot pot of oil, Make sure the tube does not rust.

3, if found to break the screen, the mouth of the crab skin tube unloaded, arrived on or fill on the 12 mesh screen can be.

4, long-term do not use, re-use when the first open air 10 to 15 minutes, the original debris removed, and the barrel of oil after drying.

5, the temperature must turn the machine, turn off the furnace, the machine also need to turn 5 to 8 minutes.

6, after the shutdown of the class will be extinguished, you can use wet coal furnace and ensure that the second class before the start of the furnace shall not have fire.

The above is the the simple maintenance methods for seeds and nuts roaster machinery, do not just pay attention to the use and not pay attention to maintenance, resulting in some unnecessary losses.