Peanut machine includes a variety of mechanical equipment, such as dry and wet  typ peanut skin peeling machine, peanut cutting machine, peanut drum roasting machine, the application is more extensive, but also save a lot of artificial people, here we take a look at the use of peanut machinery need to pay attention to what matters.

1, First check all kinds of fasteners are tightened, each bearing whether there is grease, rotating part is flexible, whether placed on a smooth ground.

2, To check the power supply voltage, the switch must be in a disconnected position.

3. After the motor starts, the steering shall be in accordance with the direction indicated on the machine. Take a few minutes off first and make sure it is running properly before feeding the peanuts.

4, Peanut feeding should be uniform, appropriate amount, can not contain iron filings, stones and other debris, so as not to cause mechanical accidents.

5, When the peanut shell increases, may move the motor downward, with the tight fan belt, increases the blowing capacity.

6, When the operation, people should not stand on the side of the belt, so as not to hurt people.

7. When the machine is ready for storage, it should eliminate its appearance, dust, dirt and residual grains and other debris. The machine should be covered well and stored in a dry warehouse to avoid the sun and rain.

8. Remove the belt and take care of it separately.

9. Clean the bearings with diesel oil and grease them after airing.

10, Should maintain the transmission parts and bearings inside the room sufficient grease, and regularly cleaned and replaced.